-40%

Talstar P Professional Insecticide FMC Talstar Pro NOT FOR SALE TO:ME,NY,CT,SD

$ 17.73

Availability: 3065 in stock
  • All returns accepted: Returns Accepted
  • Stink Bugs Bed Bugs: Spiders Mosquitoes
  • Cockroaches Fleas: pillbugs, chinch bugs
  • Restocking Fee: No
  • Condition: New
  • Model: Talstar Pro Insecticide 16 oz.
  • Country of Manufacture: United States
  • Return shipping will be paid by: Buyer
  • earwigs, millipedes: Dichondra Flea Beetles, spittlebugs
  • EPA Registration: 279-3206
  • MPN: 10056778
  • Brand: FMC
  • Country/Region of Manufacture: United States
  • Pest/Weed Type: Insect
  • Type: Bug Killer
  • Item must be returned within: 30 Days
  • Refund will be given as: Money Back
  • ants clover mites: mole crickets field crickets
  • For: Insects

    Description

    **Not for Sale To:
    ME, NY, CT, SD
    **
    ( due to pesticide regulations )
    TALSTAR PROFESSIONAL INSECTICIDE -  1 Pint ( 16 oz. )
    Dependable insect control designed with pros in mind.
    Talstar One is odorless, dries clear, leaves no stains, is non-irritating to the skin, and won't break down easily with rainfall. For termites, ants, fleas, mosquitoes, roaches, beetles, spiders, and everything in-between.
    For decades, PMPs have made
    Talstar
    their number one trusted brand of insecticides. With its broad label and dependable efficacy, Talstar Professional has been expertly formulated to help you get the job done right every time.
    Talstar Professional
    achieves long-lasting control of over 75 pests, including ants, termites, cockroaches, spiders, bed bugs, fleas and ticks. And with its flexible label, Talstar Professional is approved in multiple use-sites, so you can use it almost anywhere: indoors and out, in industrial, commercial and food-handling areas.
    See results. Not residue
    .
    Talstar Professional
    is water based, so it’s non-irritating and contains no odorous or plant-damaging solvents. Talstar Professional leaves no unsightly residues and causes no phytotoxicity. Once dry, it is virtually impossible to tell where Talstar Professional has been sprayed.
    To control pests indoors and outdoors on residential, institutional, public, commercial, and industrial buildings, greenhouses, animal confinement facilities/livestock premises, kennels, food handling establishments, and lawns, ornamentals, parks, recreational areas and athletic fields.
    General Information on the Use of this Product
    Talstar P Professional Insecticide
    controls a wide spectrum of insects and mites on trees, shrubs, foliage plants, non-bearing fruit and nut trees, and flowers in greenhouses, interiorscapes including hotels, shopping malls, office buildings, etc., and outdoor plantscapes, such as around residential dwellings, parks, institutional buildings, recreational areas, athletic fields and home lawns. Non-bearing crops are perennial crops that will not produce a harvestable raw agricultural commodity during the season of application.
    Talstar P Professional Insecticide
    may also be used in feed and food handling establishments, animal confinement facilities, kennels, confined animal feeding operations, livestock premises, and in/around/under structures.
    INDOOR USE
    For control of Ants, Carpenter Ants, Bedbugs, Bees, Beetles, Biting Flies, Boxelder Bugs, Centipedes, Cicadas, Cockroaches, Crickets, Earwigs, Firebrats, Fleas, Flies, Gnats, Millipedes, Mosquitoes, Moths, Scorpions, Silverfish, Sowbugs (Pillbugs), Spider Mites, Spiders (including Black Widow, Brown Recluse and Hobo Spiders), Springtails, Ticks (including Brown Dog Ticks), Vinegar (Fruit) Flies, and
    Wasps.
    In the home, all food processing surfaces and utensils should be covered during treatment or thoroughly washed before use. Exposed food
    should be covered or removed. Use a 0.02% to 0.06% dilution (0.33 to 1 fluid oz. per gallon of water) for residual pest control in buildings and structures and on modes of transport.
    Apply either as a crack and crevice, pinstream, spot, coarse, low pressure spray (25 psi or less) or with a paint brush.
    Apply as a coarse, low pressure, crack and crevice or spot spray to areas where pests hide, such as baseboards, corners, storage areas, closets, around water pipes, doors and windows, attics and eaves, behind and under refrigerators, cabinets, sinks, furnaces, stoves, the underside of shelves, drawers and similar areas. Do not use as a space
    spray. Pay particular attention to cracks and crevices.
    Mixing Directions:
    See mixing directions in “Pest Control on Outside Surfaces and Around Buildings” section.
    Talstar P Professional Insecticide is to be diluted with water for spray or brush application. Fill sprayer with the desired volume of water and add Talstar® P Professional Insecticide. Close and shake before use in order to insure proper mixing. Mix only the amount of solution needed for the application. Retreatment may be necessary to achieve and/or maintain control during periods of high pest pressure. Repeat application is necessary only if there are signs of renewed insect activity. Limit repeat application to no more than once per seven days.
    Active Ingredient:
    Bifenthrin* ...................................................... 7.9%
    Standard Application Dilution Rates / Mixing Rates:
    0.33 oz./gallon of water – 0.02% - prevention, low level infestions
    0.5 oz./gallon of water – 0.031% – general indoor or outdoor use
    1.0 oz./gallon of water - 0.06% - severe infestations, less frequent treatments, longer residual, quicker knockdown
    1 gallon of finished solution should cover 1,000 square feet when using a hand pump sprayer.
    Use in the Following Areas:
    Indoors and outdoors on residential, institutional, public, commercial, and industrial buildings, greenhouses, animal confinement facilities/livestock premises, kennels, food handling establishments, and lawns, ornamentals, parks, recreational areas and athletic fields; trees, shrubs, foliage plants, non-bearing fruit and nut trees, and flowers in greenhouses, interiorscapes, including hotels, shopping malls, office buildings, etc., and outdoor plantscapes, such as around residential dwellings, parks, institutional buildings, recreational areas, athletic fields and home lawns (Non-bearing crops are perennial crops that will not produce a harvestable raw agricultural commodity during the season of application); feed and food handling establishments, animal confinement facilities, kennels, confined animal feeding operations, livestock premises, and in/around/under structures
    Indoors
    Use 0.33 to 1 fluid oz. per gallon of water for residual pest control in buildings and structures and on modes of transport. Apply either as a crack and crevice, pinstream, spot, coarse, low pressure spray (25 psi or less) or with a paint brush.
    Apply as a coarse, low pressure, crack and crevice or spot spray to areas where pests hide, such as baseboards, corners, storage areas, closets, around water pipes, doors and windows, attics and eaves, behind and under refrigerators, cabinets, sinks, furnaces, stoves, the underside of shelves, drawers and similar areas.
    Do not use as a space spray.
    Pay particular attention to cracks and crevices.
    Limit repeat application to no more than once per seven days.
    Talstar P may be converted to a foam for residual treatment of voids or as a spot spray when visual marking of application is desired.
    Bedbug Control -
    Thorough application should be made to crack and crevices where evidence of bed bugs occurs. This includes bed frames, boxsprings, inside empty dressers and clothes closets and carpet edges, high and low wall moldings and wallpaper edges. Do not use this product on bed linens, pillows, mattresses or clothes. Remove all clothes and other articles from dressers or clothes closets before application. Allow all treated areas to thoroughly dry before use. Not recommended for use as sole protection against bedbugs. If evidence of bedbugs is found in/on mattresses, use products approved for this use.
    Outdoors
    General application for crawling pests
    - Mix 0.5 or 1 oz. of Talstar P in one gallon of water and apply to the outside foundation of the home, approx. 3 feet up the side of the house and 2 feet out from the house. Also spray entry points into the home such as around windows, pipes, doorways, etc. For general preventative treatment, apply Talstar P once every 3 months.
    Repeat applications should be limited to no more than once per seven days when using 0.33 oz./gal. of water. For the high use rate of 1.0 oz. per gallon of water, do not apply more than once every four weeks.
    Mosquitos -
    In addition to the treatment around the foundation of the home as mentioned above, spray Talstar P on the underside of leaves on the lower-hanging branches of trees around the backyard or area where mosquitoes are a problem.  You can also spray the underside of leaves on shrubs and ornamentals. Do not apply when wind speed exceeds 10 MPH.
    Higher application volumes may be used to obtain the desired coverage of dense vegetation or landscaping materials.
    Bagworms –
    Use 0.125 to 0.25 oz. per 1,000 square feet (or 5.4 - 10.8 oz. per 100 gal.). Apply as a full coverage foliar spray. Use of a Chapin Slide Pump Sprayer will help reach higher into trees. Apply when larvae begin to hatch and spray larvae directly. Applications when larvae are young will be most effective.
    Chinch bugs –
    Use 0.5 to 1.0 oz. per 1,000 square feet. Chinch Bugs infest the base of grass plants and are often found in the thatch layer. Irrigation of the grass area before treatment will optimize the penetration of the insecticide to the area where the chinch bugs are located. Use higher volume applications if the thatch layer is excessive or if a relatively long mowing height is being maintained. Chinch Bugs can be one of the most difficult pests to control in grasses and the higher application rates (Up to 1 fluid oz. per 1000 square feet) may be required to control populations that contain both nymphs and adults during the middle of the summer.
    Lawn applications –
    A hose end sprayer like the Chapin hose end sprayer may be used to apply Talstar P for lawn pests. Use up to 1.0 oz. per 1,000 square feet. Higher volume applications may be more effective with some pests, so you may want to calibrate the sprayer to a lower rate (for example, 0.25 oz/gal.) and use more water to cover a 1,000 square foot area.
    Stink Bugs –
    Talstar P has an expanded label for treatment of Stink Bugs indoors, outdoors, on lawns, and on ornamental plants. Use 0.33 to 1.0 oz/gal. of water and treat around door frames, window frames, vents, eaves, around the bottom of your foundation, and any other crack or crevice where an insect could gain entry, once a month August-November.
    Termite Applications-
    Talstar P may be used for pre-construction or post-construction prevention of subterranean termites. Use 1.0 oz/gal. of water (0.06% solution) for most termite applications. For preconstruction horizontal barriers (such as under a concrete slab), use 1 gallon of solution per 10 square feet. For perimeter barrier treatments, use 4 gallons of solution per 10 linear feet. See our article How to Do a Termite Treatment, for further instructions on perimeter termite treatments. See product label for full instructions on using Talstar P to control subterranean termites.
    Features
    Pet safe when dry
    Virtually no odor or staining
    Easy to remember mixing rate
    Convenient squeeze and pour container makes measuring and mixing easy
    Talstar P Professional Insecticide may be tank-mixed with adjuvants and with other pesticides, including insect growth regulators.
    Talstar One is tough on pests and easy on everything else: Talstar One multi-insecticide is water based and contains no alpha cyano group. That means you can use it inside and out. You can apply it to a larger perimeter area.
    Non-irritating, non-staining and contains no odorous or plant-damaging solvents.
    Compatible with herbicides, fungicides, insecticides and liquid fertilizers.
    Once it dries, it is virtually impossible to tell where it has been sprayed. So there are no unsightly residues and phytotoxicity.
    Talstar One is tough on ants and general household pests, but easy on the household.
    Talstar One is labeled for over 75 different pests and provides fast knockdown and long-lasting control of even the toughest lawn and ornamental pests.
    Talstar multi-insecticide creates a long-lasting barrier against insect pests.  Keep roaches, ants and other insects out of your home in the first place by treating the perimeter foundation every 2-3 months.
    Talstar One is labeled for food-handling areas such as kitchens, restaurants, supermarkets and food processing plants.
    Talstar One has one of the most complete labels of any insecticide
    Talstar has a broad label you can count on. A true miticide, Talstar One controls over 75 different pests -- everything from spiders, mosquitoes, cockroaches, ticks and fleas to pillbugs, chinch bugs, earwigs and millipedes. It provides fast knockdown and long lasting control of even the toughest lawn and ornamental pests. Plus, it controls all species of ants knocking them out and keeping them out with long-lasting residual.
    Talstar One multi-insecticide is the only insecticide you'll ever need
    Talstar One insecticide has all the features and benefits you've come to rely on from the Talstar® brand of products. It has the proven performance and protection of its active ingredient, bifenthrin. It has long residual control of termites and 75 other pests. Its broad label includes everything from pre- and post-construction termite treatment, indoor and outdoor pest control, turf and ornamental applications, and food-handling areas.
    Talstar One is formulated for long-lasting effectiveness
    Talstar One multi-insecticide has the active ingredient bifenthrin, which has a unique chemical structure like that of no other pyrethroid. For termite control, that means the longest average residual in the industry and a retreat rate well below industry averages. In fact, Talstar One is averaging more than 12 years at 100% control in all USDA testing sites and 16 years and still counting at USDA sites in Florida and Arizona. Plus it provides a barrier that termites can't penetrate, for superior structural protection.
    Extra Tips for Using
    Allow at least 30 minutes after application before allowing pets or children into treatment area. For best results, allow 24 hours after outdoor application before expected rainfall or watering. Some outdoor applications may require irrigation before or after application.
    Use with an IGR such as NyGuard IGR for control of all life stages of insects such as fleas.
    Store out of direct sunlight and extreme temperatures.
    Concentrate should be viable for 3-5 years. If separation occurs, shake well before using.
    Do not apply more than 1 oz. Talstar P per 1,000 square feet.
    It is a violation of Federal Law to use this product in a manner inconsistent
    with its labeling.
    Do not apply a broadcast application to interior surfaces of homes.
    Do not apply by air.
    Do not apply in plant nurseries.
    Do not apply this product through any kind of irrigation system.
    Not for use on sod farm turf, golf course turf, or grass grown for seed.
    Do not water treated area to the point of run-off.
    Do not make applications during rain.
    Application is prohibited directly into sewers or drains, or to any area
    like a gutter where drainage to sewers, storm drains, water bodies, or
    aquatic habitat can occur. Do not allow the product to enter any drain
    during or after application
    **This Product Is Not for Sale To:  NY, SD, CT **
    No oral advice or written information given by American Pest supplies shall create a warranty.
    American Pest Supplies is a seller of various products. American Pest Supplies does not warranty the safety or the effectiveness of any of the products listed on this website. Any warranty or guarantee of safety or purpose for any particular use lies solely with the manufacturer.
    Pest Control Products always have a label attached and it is here by noted that for all purposes the label is the law and according to federal law the product label must be followed and that any pesticide product must be used according to the label directions.
    Any advice or recommendations given by American Pest supplies or anyone representing American Pest Supplies will never be intended to take the place of the pesticide label.The pesticide label is the law and a legal document.  Always read and follow the label directions before using any pesticide product.
    Some of the products sold by American Pest Supplies could require special licensing training or registration of the user in that users State, County, City, Etc. It is the sole responsibility of the purchaser and/or the end user to provide a license, permit, registration etc. If required by that purchasers local or state authorities.It is the sole responsibility of the user to verify that any products purchased are licensed for use in their State, County or City.
    The customer assumes all responsibility for safe, proper and legal use of any products they purchase. The products we sell are intended for personal use only, in accordance with the customer's state laws and restrictions.